Important: This page is general information, not medical advice. It does not recommend or prescribe any treatment. Always consult your doctor or pharmacist before starting, stopping or changing any medicine.
Quick facts
- How it is given
- subcutaneous
- Type
- human prescription drug
- RxNorm ID
- 854228
We do not publish dosing. How much of this medicine to take, how often, and for how long depends on your age, weight, kidney and liver function, other conditions and other medicines. That is a decision for the person who prescribes or dispenses it. Follow the directions on your own pack and ask your pharmacist if anything is unclear.
What it is used to treat
Enoxaparin sodium injection is a low molecular weight heparin (LMWH) indicated for: Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness ( 1.1 ) Inpatient treatment of acute DVT with or without pulmonary embolism ( 1.2 ) Outpatient treatment of acute DVT without pulmonary embolism ( 1.2 ) Prophylaxis of ischemic complications of unstable angina and non−Q-wave myocardial infarction (MI) ( 1.3 ) Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) ( 1.4 ) 1.1 Prophylaxis of Deep Vein Thrombosis Enoxaparin sodium injection is indicated for the prophylaxis of deep vein thrombosis (DVT), which may lead to pulmonary embolism (PE): in patients undergoing abdominal surgery who are at risk for thromboembolic complications [see Clinical Studies (14.1) ] in patients undergoing hip replacement surgery, during and following hospitalization in patients undergoing knee replacement surgery in medical patients who are at risk for thromboembolic complications due to severely restricted mobility during acute illness 1.2 Treatment of Acute Deep Vein Thrombosis Enoxaparin sodium injection is indicated for: the inpatient treatment of acute deep vein thrombosis with or without pulmonary embolism , when administered in conjunction with warfarin sodium the outpatient treatment of acute deep vein thrombosis without pulmonary embolism , when administered in conjunction with warfarin sodium 1.3 Prophylaxis of Ischemic Complications of Unstable Angina and Non−Q-Wave Myocardial Infarction Enoxaparin sodium injection is indicated for the prophylaxis of ischemic complications of unstable angina and non – Q-wave myocardial infarction, when concurrently administered with aspirin. […]
About this medicine
Enoxaparin sodium injection, USP is a sterile aqueous solution containing enoxaparin sodium USP, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is: <2000 daltons ≤20% 2000 to 8000 daltons ≥68% >8000 daltons ≤18% STRUCTURAL FORMULA *X = Percent of polysaccharide chain containing 1,6-anhydro derivative on the reducing end R X*=15 to 25% n=0 to 20 100-X H n=1 to 21 Enoxaparin sodium injection, USP 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection, USP 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. [see Dosage and Administration (2) and How Supplied/Storage and Handling (16) ] . enoxaparin-str1 enoxaparin-str2
How it works
12.1 Mechanism of Action Enoxaparin is a low molecular weight heparin which has antithrombotic properties.
Who should not take it
Enoxaparin sodium injection is contraindicated in patients with: • Active major bleeding • History of immune-mediated heparin-induced thrombocytopenia (HIT) within the past 100 days or in the presence of circulating antibodies [see Warnings and Precautions (5.4) ] • Known hypersensitivity to enoxaparin sodium (e.g., pruritus, urticaria, anaphylactic/ anaphylactoid reactions) [see Adverse Reactions (6.2) ] • Known hypersensitivity to heparin or pork products Active major bleeding ( 4 ) History of heparin-induced thrombocytopenia (HIT) within the past 100 days or in the presence of circulating antibodies ( 4 ) Hypersensitivity to enoxaparin sodium ( 4 ) Hypersensitivity to heparin or pork products ( 4 )
Warnings and cautions
Increased risk of hemorrhage: Monitor for signs of bleeding ( 5.1 , 5.2 , 5.3 ) Risk of Heparin-Induced Thrombocytopenia with or without Thrombosis ( 5.4 ) Thrombocytopenia: Monitor platelet count closely ( 5.5 ) Interchangeability with other heparins: Do not exchange with heparin or other LMWHs ( 5.6 ) Increased Risk of Thrombosis in Pregnant women with Mechanical Prosthetic Heart Valves: women and their fetuses may be at increased risk. Monitor more frequently and adjust dosage as needed. ( 5.7 ) 5.1 Increased Risk of Hemorrhage Cases of epidural or spinal hemorrhage and subsequent hematomas have been reported with the use of enoxaparin sodium and epidural or spinal anesthesia/analgesia or spinal puncture procedures, resulting in long-term or permanent paralysis. The risk of these events is higher with the use of postoperative indwelling epidural catheters, with the concomitant use of additional drugs affecting hemostasis such as NSAIDs, with traumatic or repeated epidural or spinal puncture, or in patients with a history of spinal surgery or spinal deformity [see Boxed Warning, Adverse Reactions (6.2) and Drug Interactions (7) ] . To reduce the potential risk of bleeding associated with the concurrent use of enoxaparin sodium and epidural or spinal anesthesia/analgesia or spinal puncture, consider the pharmacokinetic profile of enoxaparin [see Clinical Pharmacology (12.3) ] . Placement or removal of an epidural catheter or lumbar puncture is best performed when the anticoagulant effect of enoxaparin is low; however, the exact timing to reach a sufficiently low anticoagulant effect in each patient is not known. Placement or removal of a catheter should be delayed for at least 12 hours after administration of lower doses (30 mg once or twice daily or 40 mg once daily) of enoxaparin sodium and at least 24 hours after the administration of higher doses (0.75 mg/kg twice daily, 1 mg/kg twice daily, or 1.5 mg/kg once daily) of enoxaparin sodium. Anti-Xa levels are still detectable at these time points, and these delays are not a guarantee that neuraxial hematoma will be avoided. […]
Reported side effects
The following serious adverse reactions are also discussed in other sections of the labeling: • Spinal/epidural hematomas [see Boxed Warning and Warnings and Precautions ( 5.1 )] • Increased Risk of Hemorrhage [see Warnings and Precautions ( 5.1 )] • Thrombocytopenia [see Warnings and Precautions ( 5.5 )] Most common adverse reactions (>1%) were bleeding, anemia, thrombocytopenia, elevation of serum aminotransferase, diarrhea, nausea, ecchymosis, fever, edema, peripheral edema, dyspnea, confusion, and injection site pain ( 6.1 ) To report SUSPECTED ADVERSE REACTIONS, contact NorthStar at 1-800-206-7821 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in clinical practice. During clinical development for the approved indications, 15,918 patients were exposed to enoxaparin sodium. These included 1,228 for prophylaxis of deep vein thrombosis following abdominal surgery in patients at risk for thromboembolic complications, 1,368 for prophylaxis of deep vein thrombosis following hip or knee replacement surgery, 711 for prophylaxis of deep vein thrombosis in medical patients with severely restricted mobility during acute illness, 1,578 for prophylaxis of ischemic complications in unstable angina and non – Q-wave myocardial infarction, 10,176 for treatment of acute ST-elevation myocardial infarction, and 857 for treatment of deep vein thrombosis with or without pulmonary embolism. Enoxaparin sodium doses in the clinical trials for prophylaxis of deep vein thrombosis following abdominal or hip or knee replacement surgery or in medical patients with severely restricted mobility during acute illness ranged from 40 mg subcutaneously once daily to 30 mg subcutaneously twice daily. […]
Interactions with other medicines
Whenever possible, agents which may enhance the risk of hemorrhage should be discontinued prior to initiation of enoxaparin sodium therapy. These agents include medications such as: anticoagulants, platelet inhibitors including acetylsalicylic acid, salicylates, NSAIDs (including ketorolac tromethamine), dipyridamole, or sulfinpyrazone. If coadministration is essential, conduct close clinical and laboratory monitoring [see Warnings and Precautions (5.1) ] . Discontinue agents which may enhance hemorrhage risk prior to initiation of enoxaparin sodium or conduct close clinical and laboratory monitoring ( 2.6 , 7 )
Use in specific groups
Severe Renal Impairment: Adjust dose for patients with creatinine clearance <30 mL/min ( 2.3 , 8.7 ) Geriatric Patients: Monitor for increased risk of bleeding ( 8.5 ) Low-Weight Patients: Observe for signs of bleeding ( 8.8 ) 8.1 Pregnancy Risk Summary Placental transfer of enoxaparin was observed in the animal studies. Human data from a retrospective cohort study, which included 693 live births, suggest that enoxaparin sodium does not increase the risk of major developmental abnormalities [see Data]. Based on animal data, enoxaparin is not predicted to increase the risk of major developmental abnormalities [see Data]. Adverse outcomes in pregnancy occur regardless of the health of the mother or the use of medications. The estimated background risk of major birth defects and miscarriage for the indicated populations is unknown. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2% to 4% and 15% to 20%, respectively. Clinical Considerations Pregnancy alone confers an increased risk for thromboembolism that is even higher for women with thromboembolic disease and certain high risk pregnancy conditions. While not adequately studied, pregnant women with mechanical prosthetic heart valves may be at even higher risk for thrombosis [see Warnings and Precautions (5.7) and Use in Specific Populations (8.6) ] . Pregnant women with thromboembolic disease, including those with mechanical prosthetic heart valves and those with inherited or acquired thrombophilias, have an increased risk of other maternal complications and fetal loss regardless of the type of anticoagulant used. All patients receiving anticoagulants, including pregnant women, are at risk for bleeding. Pregnant women receiving enoxaparin should be carefully monitored for evidence of bleeding or excessive anticoagulation. Consideration for use of a shorter acting anticoagulant should be specifically addressed as delivery approaches [see Boxed Warning ] . Hemorrhage can occur at any site and may lead to death of mother and/or fetus. […]
If too much is taken
Accidental overdosage following administration of enoxaparin sodium may lead to hemorrhagic complications. Injected enoxaparin sodium may be largely neutralized by the slow intravenous injection of protamine sulfate (1% solution). The dose of protamine sulfate should be equal to the dose of enoxaparin sodium injected: 1 mg protamine sulfate should be administered to neutralize 1 mg enoxaparin sodium, if enoxaparin sodium was administered in the previous 8 hours. An infusion of 0.5 mg protamine per 1 mg of enoxaparin sodium may be administered if enoxaparin sodium was administered greater than 8 hours previous to the protamine administration, or if it has been determined that a second dose of protamine is required. The second infusion of 0.5 mg protamine sulfate per 1 mg of enoxaparin sodium may be administered if the aPTT measured 2 to 4 hours after the first infusion remains prolonged. If at least 12 hours have elapsed since the last enoxaparin sodium injection, protamine administration may not be required; however, even with higher doses of protamine, the aPTT may remain more prolonged than following administration of heparin. In all cases, the anti-Factor Xa activity is never completely neutralized (maximum about 60%). Particular care should be taken to avoid overdosage with protamine sulfate. Administration of protamine sulfate can cause severe hypotensive and anaphylactoid reactions. Because fatal reactions, often resembling anaphylaxis, have been reported with protamine sulfate, it should be given only when resuscitation techniques and treatment of anaphylactic shock are readily available. For additional information consult the labeling of protamine sulfate injection products.
Before you take anything new
Tell your pharmacist or doctor about every medicine you take — including ones bought without a prescription, herbal products and supplements. Interactions are one of the most common avoidable causes of harm from medicines, and a pharmacist can check your full list in a couple of minutes.
This page is built from the openFDA record of the U.S. Food and Drug Administration's approved labelling for this product, effective 21 June 2024. Label text has been shortened and reformatted for readability; safety wording has not been altered in meaning. FDA labelling describes products approved in the United States — brand names, strengths, formulations and approved uses may differ in your country. Always read the leaflet that comes with your own pack. PocketsInfo is not affiliated with, and is not endorsed by, the FDA. Retrieved 2026-07-30.